Designed for maximum articulation, improved strength, and adjustability, these complete J-Krawl systems are available for next-level performance. Components include J-Flex upper and lower control arms, Jspec dual-rate coil springs at each corner designed to level out the stance, and premium FOX 3.0 Factory Race Series remote reservoir internal bypass shocks all the way around to match your performance needs. Internal bypass position-sensitive and race-inspired damping technology gives you the feeling of endless travel by smoothly ramping up control of both bottom- and top-out extremes while floating over obstacles in the ride zone. External compression adjusters allow you to quickly adapt the shocks to a wide variety of terrain and vehicle loads. Also included is an adjustable front track bar, quicker disconnect front sway bar end links, rear sway bar links, and bump stop extensions. J-Krawl builds off Jeep’s factory suspension mounting points and upgrades everything front to rear. Adjustability is important for fine-tuning suspension geometry. J-Krawl delivers. Dial-in front caster, rear pinion, and overall vehicle wheelbase. The JKS Engineering team spent a lot of time dialing in the FOX shock valving and spring rates to suit J-Krawl's combination of parts as well as oversized wheels and tires. You'll be impressed with the stability and compression/rebound response. Take your Jeep's off-road performance and strength to the next level. It should be noted that an aftermarket front driveshaft is strongly recommended due to potential additional travel.

In the box for JSPEC171FRS:

FOX88326077 (x1) NF: Kit: 18-ON Jeep JL, Front, Internal Bypass, 3.0 Series, R/R, 3.5-4.5" Lift, DSC, Requires Front Driveshaft FOX88326081 (x1) Kit: 20-ON Jeep Gladiator, Rear, Internal Bypass, 3.0 Series, R/R, 2-3” Lift, DSC JKS1616 (x1) 2018-2022 Jeep Wrangler JL/JT Adjustable Front UCA JKS1625 (x1) 2018-2022 Jeep Wrangler JL Front Lower J-Flex Control Arm Kit JKS1662 (x1) 2020-2021 Jeep Gladiator JT Rear Adjustable Lower Control Arm Kit JKS1667 (x1) 2020-2021 Jeep Gladiator JT Rear Adjustable Upper Control Arm Kit JSPEC1257 (x1) 2020-2021 Jeep Gladiator JT Rear 1.5in Coil Spring Box Kit JSPEC1304 (x1) 2020-2021 Jeep Gladiator JT J-Krawl Main Box Kit JSPEC1352 (x1) 2018-2021 Jeep Wrangler JL 3.5in Front Coil Spring Kit - HD

With conventional steering stabilizers, turning in one direction creates an increase in pressure inside the stabilizer as the shaft occupies more volume in the body and displaces the oil. The repercussion is a push or pulls steering force felt by the driver as the stabilizer attempts to return to its neutral state overcome this unidirectional force, dual opposing stabilizers are often used, but this requires additional mounting hardware and space.

The Factory Race Series 2.0 Stabilizer ATS utilizes an Adjustable Through Shaft (ATS) architecture that eliminates shaft fluid displacement throughout the stabilizer's entire travel in both directions. The external piggyback reservoir provides additional fluid capacity and utilizes an Internal Floating Piston (IFP) to separate the fluid from the nitrogen gas charge to eliminate cavitation. For increased control that can be tailored to any driving style and setup, an external adjuster provides 24 clicks of adjustment to fine-tune the feel. The result is highly customizable and consistent damping of unwanted steering feedback in a single, bolt-on stabilizer.

Other accessories shown on vehicle not included please contact us for more details* Offer available for installation services offered in Miami, FL customer responsible for bringing the Jeep to our facilities.