BDS 4" Coil-Over Lift Kit for 2021 Ford F150 4WD - 1583F
THIS ITEM IS IN STOCK & READY TO SHIP
Description
Pull out all the stops with this BDS 4" Coilover system with clearance for 35" tires.
These precision-built and ultra-capable 4" Coilover lift systems offer to improve vehicle performance and utilize FOX 2.5 factory series remote reservoir coil-overs (available with optional DSC adjustment) for truly next-level performance and capability. These Coilover systems are based around the tried and true high clearance design that has made BDS the go-to when lifting 2009+ F150s now updated specifically for the redesigned 2021 Ford F150. These systems include everything necessary to correct suspension, steering and driveline geometry to maintain on-road handling while improving strength and offroad capability. Kits feature a pair of high-strength cross members, along with differential skid plate, steering knuckles, differential relocation brackets, sway bar relocation, brake line relocation, driveshaft extension, alignment cam bolts, rear blocks, longer u-bolts, and FOX 2.0 performance series IFP gas shocks. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC System compliance, and a 5year-60,000mile drivetrain warranty to match the dealer. Improve the look and capability of your 2021 Ford F150.
- Tire & Wheel Combinations
- 35x12.50 w/20x8 and 5.5-5.75" backspacing
- 295/60 w/20x9 and 4.5-5.75" backspacing
- 35x12.50 w/18x8 or 20x9 and 4.5-5.75" backspacing
*Trimming may be required*
- Est. Installation: 8-10 hours
- Difficulty Level (easy 1 - 5 complicated): 4
Important Kit Notes
- 1. 18" or larger diameter wheels required. Stock 17" and 18" wheels cannot be re-installed. Stock 20" wheels can be used with up to a 305/60R20 tire.
- 2. 18" wheels with 5-5.5" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle/tie rod. 5.5" backspacing is highly recommended for tire to frame crash bar clearance.
- 3. Models with 2-piece rear driveshaft WILL require carrier bearing shim kit 122405 (not included w/ kit)
- 4. Block kits replace factory 1-1/4" block. Stock block will not be reinstalled.
- 5. Crash bars may require modification based on wheel and tire choice. It is the end users responsibility to ensure modifications are non-detrimental to vehicle safety.
- 6. Does NOT fit diesel models.
- 7. Will not work with Tremor models.
- 8. Some trucks with a 2 piece drive shaft may have a recall from Ford regarding the rear driveshaft. (Safety Recall 21S25) Due to the recall procedure, BDS recommends to have this performed prior to installing the lift.
BDS Suspension Lift Kit Warranty
All BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".
If you are the original purchaser of any BDS lift kit and it breaks, we will give you a new part. Period.
Proposition 65 WARNING!